Maple-systems HMI5000 Series Manuel d'utilisateur télécharger pdf (Page 2)

2 HMI5000 Series Installation Guide

1010-1005 Rev 05 www.maplesystems.com

 Discharging personal static by grounding yourself prior to

handling the HMI.

 Handling the HMI at a static-free grounded workstation.

 Connecting the frame ground ( ) connector of the HMI to a

clean earth ground.

 Placing the HMI in an antistatic bag during transport.

Unpacking the Unit

Carefully unpack the HMI. Please read any instructions or cautions that

appear on the shipping container. Check all material in the container

against the packing list. Maple Systems, Inc. will not accept

responsibility for shortages against the packing list unless notified within

30 days. The equipment and accessories were inspected and tested by

Maple Systems before shipment; all of the equipment should be in good

working order. Examine the equipment carefully; if any shipping damage

is evident, notify the carrier immediately. You are responsible for claim

negotiations with the carrier. Save the shipping container and packing

material in case the equipment needs to be stored, returned to Maple

Systems, or transported for any reason.

Packing List

HMI5000 Series Touchscreen

Power Connector

Mounting Clamps

HMI5043N/T, HMI5056N,HMI5070NH/TH/ETH

HMI5100N/T, HMI5104TH, HMI5104XH

HMI5121X, HMI5150X

Spare Fuse

HMI5000 Series Installation Guide

1 2 3 4 5 6 7 ... 15 16

Pas de commentaire

Maple-systems HMI5000 Series Manuel d'utilisateur Page 2