Maple-systems HMI5000L Series Manuel d'utilisateur télécharger pdf (Page 2)

2 HMI5000L Installation Guide

1010-1018 Rev 01 www.maplesystems.com

Static Awareness

Do NOT remove the rear cover of your HMI5000L Series product –

doing so will void your warranty. When the rear cover is removed the

circuitry inside is exposed to possible damage by electrostatic discharge

during handling. Minimize the possibility of electrostatic discharge by:

 Discharging personal static by grounding yourself prior to

handling the HMI.

 Handling the HMI at a static-free grounded workstation.

 Connecting the frame ground ( ) connector of the HMI to a

clean earth ground.

 Placing the HMI in an antistatic bag during transport.

Unpacking the Unit

Carefully unpack the HMI. Please read any instructions or cautions that

appear on the shipping container. Check all material in the container

against the packing list. Maple Systems, Inc. will not accept

responsibility for shortages against the packing list unless notified within

30 days. The equipment and accessories were inspected and tested by

Maple Systems before shipment; all of the equipment should be in good

working order. Examine the equipment carefully; if any shipping damage

is evident, notify the carrier immediately. You are responsible for claim

negotiations with the carrier. Save the shipping container and packing

material in case the equipment needs to be stored, returned to Maple

Systems, or transported for any reason.

Packing List

HMI5000L Series Touchscreen

Power Connector

Mounting Clamps

Spare Fuse (Except HMI5043L)

HMI5000L Installation Guide

1 2 3 4 5 6 7 ... 19 20

Pas de commentaire

Maple-systems HMI5000L Series Manuel d'utilisateur Page 2