Maple-systems HMI5000 Series Manuel d'utilisateur télécharger pdf (Page 125)

Creating Windows 119

1010-1007, Rev. 10

4. Modify the window parameters, then press OK. The Open Window dialog box reappears.

5. If you wish to open the window you just created, click on the window and click Open. Otherwise, click Exit to

return to the main screen of EasyBuilder.

6. An alternate method of creating a new window is to right-click on an unused window number in the

Windows Object List and select New. The Window Settings dialog opens.

Window Settings

Let’s look more closely at the parameters you can change when creating a new window.

 When a window is initially created, the window settings can be edited to make changes; however, once a window

has been created, the window number cannot be changed. To change the window settings, highlight the desired

window in the Open Window dialog and click on the Settings... button.

Alternately, right-click on the desired window in the Windows Object List and select Settings.

Assigning a Window Name

The Name is a description box used to help you identify what the window is used for without having to actually open

the window and look at the contents. Up to 50 characters can be entered into this field with space characters

allowed.

Assigning the Window Number

Although 1999 windows are available on the HMI5000 Series, two are specifically reserved for the Common Window

and the Fast Selection window and several are reserved for internal use. Therefore, you can assign #10-1999 to any

window you create. When you initially create a window, EasyBuilder will automatically assign the lowest available

number to the window. However, you can assign any number within the allowed range. In this manner, you can group

windows together that may share some common traits.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 201 202

Pas de commentaire

Maple-systems HMI5000 Series Manuel d'utilisateur Page 125