Maple-systems HMI5000 Series Manuel d'utilisateur télécharger pdf (Page 16)

10 EZware5000 Series Programming Manual

1010-1007, Rev. 10

10. Configure your password settings.

Local Password

The password required to enter local setup.

Upload Password

The password required to upload data from the HMI to a PC or memory module.

Download

Password

The password required to download data to the HMI from a PC or memory module.

Upload (History)

Password

The password required to upload history files from the HMI to a PC or

memory module.

11. The new password must be entered, and then entered again to confirm. As the password is entered into the

confirm field, an indicator will show if the two passwords match.

12. Click on the History tab to display the History dialog. This is where data stored in the HMI can be cleared.

 This will not clear data stored on an SD card or USB flash drive.

Clear Recipe

The HMI’s stored recipe data will be cleared when the Clear button is clicked.

Clear Eventlog

The HMI’s stored event log data will be cleared when the Clear button is clicked.

Clear Datalog

The HMI’s stored data log data will be cleared when the Clear button is clicked.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 201 202

Pas de commentaire

Maple-systems HMI5000 Series Manuel d'utilisateur Page 16