Maple-systems HMI5000 Series Manuel d'utilisateur télécharger pdf (Page 60)

54 EZware5000 Series Programming Manual

1010-1007, Rev. 10

EasyBuilder-5000 Development Window

Objects Summary

EasyBuilder includes several active graphics objects that are used to represent data that is stored in the PLC or

internal memory of the HMI. The data represented can be single bit coils, 16-bit, 32-bit, or 64-bit registers. The data

can be represented as numbers, ASCII characters, or as graphic shapes or bitmap images. This section provides a

summary of all the objects available in EasyBuilder-5000. Most of these objects are accessible by clicking Objects in

the top menu in EasyBuilder, or by clicking on its icon in the Object 1 or Object 2 Toolbar.

Refer to the Help file (Help > Parts List) for more information relating to each object.

Bit Lamp

The Bit Lamp Object is used as an indicator to represent the ON or OFF status of a bit or coil in the PLC, or a bit in the

HMI local memory (LB). If the bit is cleared (0, False), the State 0 Shape of the Bit Lamp will be displayed. If the bit is

set (1, True), the State 1 Shape of the Bit Lamp will be displayed. The Bit Lamp can also blink in various ways.

Word Lamp

The Word Lamp Object is used as an indicator to represent the value in a PLC register, or the value in a register in the

HMI local memory (LW). Creates a graphics object to reflect the current state of a multi-state PLC data register. It can

display a different shape or picture depending on the value in the register. If the value is 0, the first shape is

displayed, if the value is 1, the second shape is displayed, etc. A Word Lamp can display up to 256 different shapes

and text strings, corresponding to register values of 0 – 255.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 201 202

Pas de commentaire

Maple-systems HMI5000 Series Manuel d'utilisateur Page 60