Maple-systems HMI5000 Series Manuel d'utilisateur télécharger pdf (Page 95)

Using EZware-5000 89

1010-1007, Rev. 10

To configure General tab settings:

1. Fast selection button: The Attribute: drop-down enables or disables the fast selection button, which is used

to open the Fast Selection window (window number 3). The Settings button sets the look of the button

including shape and color. The Position drop-down sets the fast selection button on either the lower left or

lower right portion of the display. When checked, the Hide button when HMI starts option causes the fast

select button to be hidden when the HMI starts. Use Local Bit 9014 to control the Fast Select button. Clear

the bit to show the button and set the bit to hide it.

2. Screen Saver: The Back light saver sets the number of minutes (none-255) of inactivity after which the

backlight is turned off. If the value None is selected, then the back light saver is disabled.

 The backlight is re-triggered when the screen is touched or when an alarm occurs (if the Enable back light

when alarm occurs option is selected).

Screen Saver sets the number of minutes (none-255) of inactivity after which the screen saver is activated. If

the value None is selected, then the screen saver is disabled.

Saver window no. designates the window that will be used as the screen saver.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 201 202

Pas de commentaire

Maple-systems HMI5000 Series Manuel d'utilisateur Page 95