Maple-systems HMI5000 Series Manuel d'utilisateur télécharger pdf (Page 186)

180 EZware5000 Series Programming Manual

1010-1007, Rev. 10

Display warning message if access denied: This option causes the message in Window 7 (Password Restriction) to

popup when a user with an incorrect access class attempts to activate the object.

Make invisible while protected: This option causes the object to be invisible on the screen until a user with the

correct access class is logged in.

Safety Control

The Safety control area is used to prevent an operator from activating a button or switch by accidentally touching it.

Min. press time (sec): This sets the minimum amount of time in seconds that the object needs to be pressed in order

to activate it.

 This option is not available when Display confirmation request is enabled.

Display confirmation request: When enabled, the HMI will display a confirmation window before executing the

action. The message in the confirmation window is configured in Message 0 of the System Message object (Objects >

System Message).

Max. waiting time (sec): This sets the maximum amount of time in seconds that the confirmation window stays on

the screen. If the time expires, the confirmation window closes and the action is not executed.

 This option is available only if Display confirmation request is enabled.

Interlock

The interlock feature uses the state of a bit to enable or disable the action of the object.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 201 202

Pas de commentaire

Maple-systems HMI5000 Series Manuel d'utilisateur Page 186